Epson AcuLaser CX37DN Series - Page 57

IPv6
*1
DISABLE/ENABLE Settings
DISABLE / ENABLE
Select whether or not to enable IPv6.
AUTO SETTING
*2
Settings
YES / NO
Select whether or not to enable the IPv6 auto setting.
LINK LOCAL
*2
Displays the link-local address.
GLOBAL ADDRESS
*2
Displays the global address.
GATEWAY ADDRESS
*2
Displays the gateway address.
NETWARE Settings
DISABLE / ENABLE
Select whether or not to enable NetWare.
APPLETALK Settings
DISABLE / ENABLE
Select whether or not to enable AppleTalk.
SPEED/DUPLEX Settings
AUTO / 10BASE FULL / 10BASE HALF /
100BASE FULL / 100BASE HALF /
1000BASE FULL
Specifies the transmission speed for the network and
the transmission method for bi-directional transmis‐
sion.
IEEE802.1X Settings
DISABLE / ENABLE
Select whether or not to enable IEEE802.1X.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Control Panel and Configuration Menu 57