Wired (Ethernet) Network Setup 47
8. Mac OS X 10.6: Skip to step 15 below.
9. Wait while the software is installed, then click
Next to start network
installation.
10. When you see the Firewall Warning screen, click
Next.
Note:
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup
continue. Do not select Ask Me Later, Keep Blocking, or Block.
11. If you see a screen showing more than one printer, select the product you
would like to set up, then click
Next.
12. Wait while EpsonNet Setup configures your product for the network.
13. If you see an Installation Complete screen that includes a
Print Test Page
button, click it to print a test page.
14. Click
Finish.
15. Follow the instructions on the screen to install the rest of your software.
When installation is complete, remove the CD and restart your computer.
To Next Page
Loading...
