42 Wireless Network Setup
8. When you see this screen, select a wireless network setup method, then click
Next.
Tip:
If you need help selecting a wireless network setup method, click Which option
should I choose for more information on setup methods.
Do not connect the USB cable yet.
9. At the next screen, click Next.
10. Do one of the following:
■ If you selected Using temporary USB cable connection, continue
following the instructions on the screen.
■ If you selected Using printer buttons, continue with “Setting Up With
the Touch Screen” on page 43.
Note:
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup
continue, then click Next if necessary. Do not select Ask Me Later, Keep
Blocking, or Block.
To Next Page
Loading...
