Do you have a question about the Epson BrightLink 485Wi and is the answer not in the manual?
Projection distance | - m |
---|---|
Projection technology | LCD |
Contrast ratio (typical) | 3000:1 |
Screen size compatibility | 53 - 88 \ |
Projector native resolution | WXGA (1280x800) |
Power LED | Yes |
RS-232 ports | 1 |
Connectivity technology | Wired |
Focus | Manual |
Focal length range | - mm |
Lamp type | UHE |
Lamp power | 215 W |
Light source type | Lamp |
Service life of light source | 3000 h |
Service life of light source (economic mode) | 4000 h |
Full HD | No |
Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
RMS rated power | 16 W |
Serial interface type | RS-232 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Ethernet LAN data rates | 10, 100 Mbit/s |
Noise level | 35 dB |
Noise level (economic mode) | 28 dB |
Placement | Ceiling |
Product type | Short throw projector |
Product color | White |
Market positioning | Short throw |
Power source | AC |
AC input voltage | 100 - 240 V |
Voltage tolerance | 10 % |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 7.5 W |
Power consumption (typical) | 313 W |
Storage temperature (T-T) | 5 - 35 °C |
Depth | 376 mm |
---|---|
Width | 368 mm |
Height | 145 mm |
Weight | 5398 g |