Connections – page 1
Basic Operation – page 3
Easy Interactive Tools – page 5
Remote Control – page 16
Calibration – page 17
There are several physical connections which are vital to the normal operation of
your Epson 485wi projector. The first, and most important of these, is the VGA
connection from your PC to your projector. Below is an example of a VGA cable.
There will most likely be several VGA cables installed behind the Instructors PC
going to a couple of locations. The AV Team has to split the video signal among
two pieces of equipment (Your projector and in most cases a mounted Television)
and in order to do this a splitter is installed.
-1-
To Next Page
Loading...
