Need help?Do you have a question about the Epson BrightLink 575Wi and is the answer not in the manual?
General| Matrix type | 3-panel (p-Si TFT active) |
|---|---|
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 16:10 |
| Projection distance | 0.348 - 0.597 m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 12 - 100 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, horizontal | 3 ° |
| Focus | Manual |
| Throw ratio | 0.27 - 0.37:1 |
| Digital zoom | 1.35 x |
| Focal length range | - mm |
| Lamp type | UHE |
| Lamp power | 215 W |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 10000 h |
| Full HD | No |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Microphone in | Yes |
| Audio (L/R) in | 3 |
| Composite video in | 1 |
| USB connector type | USB Type-A, USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Noise level | 35 dB |
| Noise level (economic mode) | 28 dB |
| RMS rated power | 16 W |
| Product type | Short throw projector |
| Product color | White |
| LED indicators | Status |
| Market positioning | Short throw |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 4.3 W |
| Power consumption (typical) | 333 W |
| Power consumption (PowerSave) | 239 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 376 mm |
|---|---|
| Width | 366 mm |
| Height | 155 mm |
| Weight | 5310 g |
Instructions for connecting computer, video, and audio sources.
Procedures for powering on the projector and connected devices.
Steps to properly shut down the projector and its components.
Instructions and guidance for using the interactive pens.
Troubleshooting steps for when the projector displays no image.
Critical safety precautions for using and handling the projector.
To Next Page
