C
Enter Common Name.
Enter an IP address, or an identifier such as an FQDN name for the printer. You can enter between 1 and 128
characters.
Note:
You can separate distinguished name (CN) with commas.
D
Specify a validity period for the certificate.
E
Click Next.
A confirmation message is displayed.
F
Click OK.
The printer is updated.
Note:
Click Confirm to verify the certificate information.
Related Information
& “Accessing Web Config” on page 20
Encrypted Communication Using IPsec/IP Filtering
About IPsec/IP Filtering
If the printer supports IPsec/IP Filtering, you can filter traffic based on IP addresses, services, and port. By combining
of the filtering, you can configure the printer to accept or block specified clients and specified data. Additionally, you
can improve security level by using an IPsec.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Security Settings
39
To Next Page
Loading...
Need help?
General