Epson C11CF39402A0 - User Manual

Questions and Answers

W
Wyatt CookeAug 27, 2025
What to do if Epson C11CF39402A0 does not work and the control panel lights are off?
- H
  Hannah BarrAug 27, 2025
  If your Epson Printer doesn't work and the control panel lights are off, here's what to check:* First, ensure the printer is turned on.* Next, verify the power cord is properly plugged into both the electrical outlet and the printer itself. If it wasn't, turn off the printer, firmly plug in the cord, and then turn the printer back on.* Finally, try a different electrical outlet to rule out a faulty outlet.
S
smithdanielAug 27, 2025
What to do if Epson C11CF39402A0 Printer prints strange symbols, incorrect fonts, or other inappropriate characters?
- A
  adam08Aug 27, 2025
  If your Epson printer is printing strange symbols or incorrect characters, it indicates a communication issue. Ensure you're using the correct interface cable and that the communications protocol is correct. Also, verify that the correct character table is selected in your software. Finally, confirm that the correct printer is selected in your software before printing.
M
michelle97Aug 28, 2025
What to do if Epson C11CF39402A0 makes noise, but nothing prints?
- B
  bhowardAug 28, 2025
  If your Epson printer makes noise but doesn't print, or if printing stops abruptly, check the following: Ensure the paper-thickness lever is correctly set to match the thickness of your paper. Also, check the ribbon. Remove any slack by turning the ribbon-tightening knob, or reinstall the ribbon cartridge.
T
timothyjeffersonAug 28, 2025
What to do if part of Epson C11CF39402A0 Printer printout is missing?
- D
  Dana McmahonAug 29, 2025
  If parts of your Epson printer's printout are missing, or there are missing dots, the ribbon may have too much slack, be loose, or the cartridge might not be installed properly. Remove any slack in the ribbon by turning the ribbon-tightening knob, or reinstall the ribbon cartridge. Also, the ribbon might be worn out, so consider replacing it.
M
Melissa LoweAug 29, 2025
What to do if Epson C11CF39402A0 has lines of dots missing in the printout?
- C
  crystalbrooksAug 29, 2025
  If you notice lines of dots missing in your Epson printer's output, it indicates that the print head is damaged. Stop printing and contact your dealer to have the print head replaced.
E
Emily HamiltonAug 30, 2025
What to do if Epson C11CF39402A0 Printer prints all the text on the same line?
- S
  Susan GonzalezAug 30, 2025
  If your Epson printer prints all text on one line, it means no line feed command is being sent. Turn on the auto line feed setting using the printer’s Default Setting mode so that the printer automatically adds a line feed code to each carriage return.
A
Amber WilliamsAug 30, 2025
What to do if Epson C11CF39402A0 Printer printout has extra blank lines between lines of text?
- G
  Gabriel CunninghamAug 30, 2025
  If your Epson printer's output has extra blank lines, it's likely because two line feed commands are being sent. This happens when the printer’s auto line feed setting is on. Turn off the auto line feed setting using the printer’s Default Setting mode.
S
sturnerAug 31, 2025
What to do if Epson C11CF39402A0 printing appears too high or low on the page?
- J
  James GarciaAug 31, 2025
  If your Epson printer's printing appears too high or low on the page, the paper size setting in your application software or printer driver may not match the size of the paper you are using. Check the paper size setting in your application or printer driver.
N
Nicholas WilliamsAug 25, 2025
What to do if my Epson C11CF39402A0 Printer does not print when the computer sends data?
- D
  dkhanAug 25, 2025
  If your Epson printer isn't printing when the computer sends data, try these solutions:* Make sure the printer is not paused by pressing the Pause button to turn off the Pause light.* Check that both ends of the interface cable between the printer and the computer are securely plugged in.* Ensure that you are using an interface cable that meets the requirements of both the printer and computer.* Verify that your software is properly set up for your printer by selecting your printer from the Windows desktop or in your application. If necessary, install or reinstall the printer driver software.
A
Amy ConnerSep 1, 2025
What to do if paper is not loaded correctly in Epson Printer?
- B
  brucecrawfordSep 1, 2025
  Remove and reload your paper correctly in Epson Printer.

Epson C11CF39402A0 Specifications

General

Model	Epson C11CF39402A0
Category	Printer
Type	Inkjet
Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Color Output	Color
Scanner Type	Flatbed
Scan Resolution	1200 x 2400 dpi
Compatibility	Windows, macOS
Color	Black
Connectivity	USB, Ethernet, Wi-Fi
Paper Size	A4, Letter, Legal