22
Setting the IP Address
Set the IP address of the product by following the steps below.
1. Make sure that the printer is powered on. (U
"Turning On" on page 10)
2. Press (Menu) button to display the menu.
3. Select [I/F SETUP] and press the OK button.
4. Select [NETWORK SETUP] and press the OK button.
5. Select [IP ADDRESS] and press the OK button.
6. Enter the IP address.
Use the button to select a number and the buttons to select the digit to be
changed.
7. Press the OK button.
This completes IP address setting.
Q
Notes:
For details about other network connection settings, refer to Technical Reference Guide.
This is the end of the printer setup procedures.
To Next Page
Loading...
