23
Setting the Printer
You can specify various settings for the printer from the menu screen. This section describes the procedure
for specifying basic settings.
Time Setting
Set the current date and time by following the steps below.
1. Make sure that the printer is powered on. (U
"Turning On" on page 10)
2. Press (Menu) button to display the menu.
3. Select [PRINTER SETUP3] and press the OK button.
4. Select [CLOCK] and press the OK button.
5. Enter the current date and time.
Use the button to select a number and the buttons to select the item to be
changed.
6. Press the OK button.
This completes time setting.
To Next Page
Loading...
