Operating Procedures
Projecting on a split screen
a
Press the [Split] button while projecting.
The currently selected input source is projected on the left of the
screen.
Remote control
a
• When using the interactive feature, you can also perform the
same operations from the bottom toolbar.
s "Whiteboard Mode Bottom Toolbar" p.89
s "Annotation Mode Bottom Toolbar" p.108
• You can perform the same operations from the configuration
menu.
s Settings - Split Screen p.178
b
Press the [Menu] button.
The Split Screen Setup screen is displayed.
c
Select the Source, and then press the [ ] button.
d
Select each input source for Left and Right.
Projection Functions
130
To Next Page
Loading...
