Pen Tray
Name Function
A
Fixing points
Attach the pen tray to a whiteboard or wall.
B
Security hole
Pass a commercially available lock through here.
a
It is recommended that the pen tray be tightened with two
commercially available M5 bolts.
Control Pad
4.253
Name Function
A
[Power] button [t]
Turns the projector power on or off.
s "From Installation to Projection" p.53
B
[Whiteboard] button
• Press this when the projector is off to turn on the
projector and start the interactive features in
Whiteboard Mode.
• Press this when the projector is on to change to
Whiteboard Mode. When pressed during Whiteboard
Mode, it switches to the previous input source.
s "Starting Whiteboard Mode" p.85
C
[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.54
Part Names and Functions
24
To Next Page
Loading...
