Before cleaning the projector case, turn off the projector and unplug the
power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and
mild soap. Do not spray liquid directly on the projector.
Attention
Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean
the projector case. These can damage the case. Do not use canned air, or the
gases may leave a flammable residue.
Related Links
• "Maintaining the Projector" p.157
Cleaning the Projector Case
159
To Next Page
Loading...
