The volume buttons control the projector's internal speaker system or any
external speakers you connected to the projector.
You must adjust the volume separately for each connected input source.
a
Turn on the projector and start a presentation.
b
To lower or raise the volume, press the [Volume] buttons on the
control panel or remote control as shown.
A volume gauge appears on the screen.
c
To set the volume to a specific level for an input source, select
Volume in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may
cause hearing loss.
Always lower the volume before powering off, so that you can power on and
then gradually increase the volume.
Related Links
• "Using Basic Projector Features" p.34
• "Projector Feature Settings - Settings Menu" p.137
Controlling the Volume with the Volume Buttons
68
To Next Page
Loading...
