i
Replace the lamp cover and tighten the screw to secure it.
a
Make sure the lamp cover is securely installed or the lamp will
not turn on.
Reset the lamp timer to zero to monitor the new lamp's usage.
Related Links
• "Projector Lamp Maintenance" p.162
• "Replacement Parts" p.187
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear
the lamp replacement message and to monitor lamp usage correctly.
a
Do not reset the lamp timer if you have not replaced the lamp to
avoid inaccurate lamp usage information.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Reset menu and press [Enter].
d
Select Reset Lamp Hours and press [Enter].
Projector Lamp Maintenance
165
To Next Page
Loading...
