EasyManuals Logo

Epson EB-450W User Manual

Epson EB-450W
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Submenu Function
Standby Setup
Standby Mode: You can use the following functions even when the projector is in standby mode if this is set to Communication
On.
Monitor and control the status of the projector over the network.
You can use
SNMP
g
or the dedicated application software "EasyMP Monitor" to monitor and control the status of the projector over the
network.
Output audio from the projector's speaker when a microphone is connected to the Mic input port.
*2
(Only when Standby Microphone is set to On.)
Output audio from the projector's speaker for equipment connected to the audio input port.
*2
(Only when Standby Audio is set to On.)
Standby Microphone: (This can only be set if Standby Mode is set to Communication On.)
Set whether mic input is enabled (On) or disabled (Off).
Standby Audio: (This can only be set if Standby Mode is set to Communication On.)
Set whether audio input is enabled (On) or disabled (Off).
USB Type B
Set this to USB Display when the projector and a computer are connected with a USB cable and computer images are projected.
s Quick Start Guide
Set this to Wireless Mouse when the mouse pointer is to be operated by the remote control.
s
p.48
Set this to Off when using only Easy Interactive Function (EB-465i/455Wi only).
s
p.54
Language
You can set the Language to use for displaying messages and menus.
Reset
You can return the adjustment values for Display
*1
and Operation
*3
in the Extended menu to their default settings.
To return all menu items to their default settings, see s p.91
*1When User's Logo Protect is set to On in Password Protect, settings related to user's logo cannot be changed. You can make changes after setting User's Logo Protect to
Off. s p.50
*2 Audio is not output while Power On Protect from Password Protect is set to On.
*3 Except for "High Altitude Mode".
List of Functions
79

Table of Contents

Other manuals for Epson EB-450W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-450W and is the answer not in the manual?

Epson EB-450W Specifications

General IconGeneral
Projection technologyLCD
Contrast ratio (typical)2000:1
Projector native resolutionWXGA (1280x800)
Aspect ratio16:10
RS-232 ports1
Dimensions (WxDxH)369 x 481 x 115 mm
Lamp typeUHE
Lamp power230 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)3500 h
Focal length range0 - 4.68 mm
RMS rated power10 W
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in2
Power consumption (standby)1 W
Operating temperature (T-T)0 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight5700 g

Related product manuals