Epson EB-485Wi - Changing Methods; Changing the Aspect Mode (EB-485 Wi;Eb-485 W;EB-475 Wi;Eb-475 W Only)

Changing methods
Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
a
You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.99
Changing the aspect mode (EB-485Wi/EB-485W/EB-475Wi/EB-475W
only)
Projecting images from video equipment or from the HDMI port
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Normal or Auto, 16:9, Full, Zoom, and
Native.
Example: 1080p signal input (resolution: 1920x1080, aspect ratio: 16:9)
A
Normal or Auto
B
16:9
C
Full
D
Zoom
E
Native
Projecting images from a computer
The following shows projection examples for each aspect mode.
Aspect mode Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
Normal
Adjusting Projected Images
53