Turning On the Projector
Connect the computer or video equipment you want to use with the
projector before you turn on the projector.
s "Connecting Equipment" p.26
a
Remove the lens cover.
b
Connect the projector to an electrical outlet with the power cord.
The projector's power indicator turns blue (standby status). In
standby status, power is being supplied to the projector, however it is
not turned on.
c
Press the [
t
] power button on the control panel or the remote
control to turn on the projector.
Check that a beep sounds and the status indicator flashes blue
(warm-up status). When warm-up is complete, the status indicator
stops flashing and remains blue.
Try one of the following if the image is not projected.
Turn on the connected computer or video device.
Change the screen output from the computer when using a laptop
computer.
Insert a DVD or other video media, and press play (if necessary).
Press the [Source Search] button on the control panel or the remote
control to detect the input sources.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.43
On the remote control, press the button the corresponds to the source.
s "Switching to the Target Image Using the Remote Control" p.44
Projecting Images
41
To Next Page
Loading...
Need help?
General
Weight and Dimensions
