a
• The positioning of your finger is usually adjusted when the Touch
Unit is installed. See the Installation Guide for details.
s Installation Guide
• Make sure you have calibrated the system for the pen using Auto
Calibration or Manual Calibration before calibrating for touch
operations with your finger.
s "Pen Calibration" p.74
• Calibrate for touch operations with your finger again if you notice
any discrepancy in positioning after doing any of the following:
- Calibrating the system for use with the pen (automatically or
manually)
- Performing angle adjustments for the Touch Unit
- Performing Keystone correction
- Adjusting the image size
- Using the Image Shift feature
- Changing the projector position
a
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
b
Select the Easy Interactive Function setting and press the [Enter]
button.
c
Select Touch Unit Setup and press the [Enter] button.
d
Select Touch Calibration and press the [Enter] button.
Using Your Finger for Interactive Touch Operations (EB-595Wi only)
83
To Next Page
Loading...
