Installation Guide
23
Installing the Setting Plate
Connecting Devices
Necessary cables
Prepare the necessary cables according to the devices being used.
•
Power cord supplied (necessary)
•
USB cable supplied
•
Touch Unit connection cable supplied
•
Optional computer cables and other cables (prepare according to the connected devices)
For details, see the projector's User's Guide (on the Document CD-ROM).
Necessary cables when using the Easy Interactive Function
When performing mouse operations using the Easy Interactive Function, you need a power cord and USB
cable. Even when projecting using a computer cable, a USB cable is necessary to perform mouse operations.
Necessary cables when installing the Touch Unit
You need the supplied Touch Unit connection cable when installing the Touch Unit and connecting it to the
projector. Operations are not performed correctly with a commercially available cable.
The shape of the plug that connects to the projector and the plug that connects to the Touch Unit differ. See
the following figure to connect to the correct ports.
To Next Page
Loading...
