Features of Firmware Version 2.00
5
Refer to these sections for a summary of the updated features of projector
firmware version 2.00.
gg Related Links
• "Updates to Supported Optional Accessories (Version 2.00)" p.5
• "Updates to Projector Menus (Version 2.00)" p.5
• "Updates to Projector Status Information (Version 2.00)" p.5
• "Updates to User Operations (Version 2.00)" p.5
Updates to Supported Optional Accessories (Version
2.00)
Version 2.00 firmware supports the following optional accessories in addition
to the existing optional accessories.
• Lens unit ELPLW08 is available with your projector.
• Lens unit ELPLM15 is available with your projector.
• Lens unit ELPLX02 is available with your projector.
(EB‑L1505U/EB‑L1500U)
gg Related Links
• "ELPLW08 Support" p.11
• "ELPLM15 Support" p.13
• "ELPLX02 Support" p.17
Updates to Projector Menus (Version 2.00)
The following projector menus change in firmware version 2.00.
• The Light Source Calibration menu is added to the Reset menu.
gg Related Links
• "Light Source Calibration Menu" p.20
Updates to Projector Status Information (Version
2.00)
The following projector status information changes in firmware version 2.00.
• The Temp Error FE and Temp Warnng FE items are added to the
Projector Status display.
gg Related Links
• "Temp Error FE and Temp Warning FE" p.27
Updates to User Operations (Version 2.00)
The following projector operations change in firmware version 2.00.
• You can turn on the On-Screen Display setting using the [Menu] button on
the projector control panel or the remote control.
gg Related Links
• "On-Screen Display Operation" p.35
To Next Page
Loading...
Need help?
General
