Transport and Installation Handbook
7
Caution
When using the projector in smokey environments such as at events and
so on, make sure you replace the air filter within 24 hours.
Do not install the projector in an airtight location.
Heat exhausted from the projector will become trapped in the location which could cause
the projector to malfunction.
When the projector is installed in an enclosed location so that it cannot be seen, make sure
the location is not airtight and that it can be ventilated and the temperature can be con-
trolled.
Notes on Installing
The projector can be installed at any angle. There is no vertical or horizontal limit to how the projector can
be installed.
You can install the projector in a portrait orientation by attaching the carrying handles to the top and bottom
of the projector.
You can remove the feet from the projector and attach them to the carrying handle.
To Next Page
Loading...
Need help?
General