Epson EB-L570U - Connecting to a USB Device

35
2. Connect the other end to one of the projector's HDMI ports.
Parent topic: Connecting to Video Sources
Related references
Projector Setup Settings - Extended Menu
Connecting to a USB Device
You can connect a USB device or cable to the projector's USB-A port to project images from the device.
Use the USB cable supplied with the device.
Note: Do not connect a USB hub or a USB cable longer than 9.8 feet (3 m), or the device may not
operate correctly.
Make sure the USB device meets the following requirements:
• The device must be a USB flash drive, USB hard drive, or a digital camera or smartphone.
• Digital cameras and smartphones must be USB-mounted devices (not TWAIN-compliant) and must be
USB Mass Storage Class compliant.
• USB hard drives must be USB Mass Storage Class compliant (not all compliant devices are
supported), formatted in FAT16/32, self-powered by their own AC power supplies (bus-powered drives
are not recommended), and should not have multiple partitions.
1. If your USB device came with an AC adapter, plug the device into an electrical outlet.