34
■ Installation Environment
Do not cover the projector's air intake or air exhaust vents. If the vents are covered, the internal temperature
could rise and cause a re.
Warning
• Be sure to leave the following amount of space around the projector so as not to block the air exhaust and intake vents.
Do not install the projector in an enclosed location such as a shelf or box, where air does not circulate.
20cm
40cm
40cm
10cm
• If you are installing multiple projectors next to each other, make sure hot air from the exhaust vent does not go into the air intake
vent of another projector.
•
• If you use a partition, you can narrow the space between the projectors.
• Do not install multiple projectors in a stacked conguration.
• A special mount is required for portrait projection.
Contact a specialist to help you prepare the mount.
To Next Page
Loading...
Need help?
General
