119
5. Select a projection mode and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Projection Modes
Related references
Projector Setup Settings - Extended Menu
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio setting. However, for certain
images you can change the aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's menus.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic: Using Basic Projector Features
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image to resize it.
Note: Set the Screen Type setting in the projector's Extended menu before changing the aspect ratio.
This setting is available only when the Scale setting is set to Full Display. You may not be able to set
the aspect ratio for all sources.
Note: The image for Native varies depending on the input signal. The available aspect ratio setting
varies depending on the input signal. If there are margins between the edge of the image and the
projected screen frame, you can adjust the position of the image using the Screen Position setting in
the projector's Extended menu .
1. Turn on the projector and switch to the image source you want to use.
To Next Page
Loading...
Need help?
General
