120
2. Press the Aspect button on the remote control.
The shape and size of the displayed image changes, and the name of the aspect ratio appears
briefly on the screen.
3. To cycle through the available aspect ratios for your input signal, press the Aspect button
repeatedly.
Note: To remove black bars when projecting from a computer, set the Resolution setting to Wide or
Normal in the Signal menu, depending on your computer's resolution.
Parent topic: Image Aspect Ratio
Related references
Projector Setup Settings - Extended Menu
Input Signal Settings - Signal Menu
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the selected Screen Type setting and
the input signal from your image source.
Note: Black bands and cropped or stretched images may project in certain aspect ratios, depending on
the aspect ratio and resolution of your input signal.
Note: Using the aspect ratio of the projector to reduce, enlarge, or split the projected image for
commercial purposes or for public viewing may infringe on the rights of the copyright holder of that image
based on copyright law.
Aspect ratio setting Description
Auto Automatically sets the aspect ratio according to the input signal.
To Next Page
Loading...
