Epson EB-L770U - Setting up Web API

83
You see the Epson Web Control screen:
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password. (The default user name is EPSONWEB and the
default password is the projector's serial number.)
3. Select Crestron Connected.
4. When you finish selecting settings, select Set and then select Yes to save the network settings.
Parent topic: Using Crestron Connected
Setting Up Web API
You can setup Web API from a Web browser and operate the projector using Web API.
Note: You can authenticate Web API communications using API authentication (Digest authentication).
The user name for API authentication is EPSONWEB; use the password that is set for Web Control
Password.