140
3. Select the Settings menu and press Enter.
4. Select Content Playback and press Enter.
5. Select On, if necessary, and press Enter.
You see a confirmation prompt.
6. Turn off the projector.
7. Turn on the projector again to enable Content Playback mode.
You can press the Home button to make sure Content Playback mode is enabled.
Note: You cannot perform the following operations in Content Playback mode:
• Color Temp. (when Warm White or Cool White is selected as Color Filter)
• Split Screen
• Blanking
• Screen Type
• Display background
• Screen
• Log Save Destination
• Detecting the input signal automatically
• Remote Password
To Next Page
Loading...
