66
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password. (For the Basic Control option, the default user
name is EPSONREMOTE and the default password is the projector's serial number in upper case.
For all other options, the default user name is EPSONWEB and the default password is the
projector's serial number in upper case.) After the first time you enter the password, you will be
prompted to change it.
You see the Epson Web Control screen.
1 Select Basic Control to control the projector remotely.
2 Select Test Pattern to display a test pattern.
3 Select Remote Camera Access to capture an image from a remote location.
4 Select Advanced to open the advanced menu screen.
5 Select Crestron Connected to open the menu.
6 Select Status Information to view the projector's status.
7 Select OSD Control Pad to change the projector's menu settings.
To Next Page
Loading...
