1717171717
I
Superimpose two images.
Press the [Screen Fit] button. The images from the
commander and the receiver are
automatically superimposed.
If you need to ne tune
the superimposed
images
If you need to make ne
adjustments, select Yes, and then
press the [
] button.
The manual adjustment screen is
displayed.
When you have nished making
adjustments, select No, and then
press the [ ] button.
B
Correct the four corners individually.
The white pattern is for adjusting
the commander, and the green
pattern is for adjusting the
receiver.
A
Adjust both projected
images manually.
Use the [ ] [ ] [ ] [ ]
buttons to correct the position of
the corners.
Correct each corner as necessary.
Press the [Esc] button to nish
making settings.
Use the [ ] [ ] [ ] [ ]
buttons to select the corner you
want to correct, and then press
the [
] button.
Adjustment point
When adjusting each
corner individually, adjust
so that the white and
green patterns overlap to
create one pattern.
To Next Page
Loading...
