Epson EB-W16SK - Page 16

1616161616
H
Adjust the projection size for the commander's frame
(white).
Select Quick Corner.Select Perform keystone
correction for the Receiver.
Use the commander's zoom ring
to adjust the commander's frame
(white) so that it is outside the
receiver's frame (green).
Use the [
] [ ] [ ] [ ]
buttons to correct the position of
the corners.
Correct each corner as necessary.
Press the [Esc] button to nish
making settings.
When you have nished making
corrections, press the [Esc]
button until the top screen is
displayed.
Use the [ ] [ ] [ ] [ ]
buttons to select the corner you
want to correct, and then press
the [
] button.
Adjustment point
• You can improve
the image quality
by minimizing the
dierence in size
between the receiver's
frame (green) and the
commander's frame
(white).
• The images can still be
superimposed even if
the commander's frame
is outside the screen.
Use the [ ] [ ] buttons to
select the direction you want
to correct, and then press the
[
] [ ] buttons to make
corrections.
Press the [Esc] button to nish
making settings.
When you have nished making
corrections, press the [Esc]
button until the top screen is
displayed.
Commander
frame
Receiver
frame
Select H/V-Keystone.
Correcting using
Quick Corner
Correct the four corners of the receiver's
frame (green) individually.
Correcting using
H/V-Keystone
Correct keystone distortion for the receiver's frame (green).