Menu Options for Maintaining the Printer
Select Maintenance on the printer's control panel.
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged.
e
printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Power Cleaning:
Select this feature to replace all of the ink inside the ink tubes. More ink is consumed than in usual
cleaning. See the "Related Information" below for details on using this feature.
Print Head Alignment:
Select this feature to adjust the print head to improve print quality.
❏ Vertical Alignment
Select this feature if your printouts look blurry or text and lines are misaligned.
❏ Horizontal Alignment
Select this feature if horizontal banding appears at regular intervals in your printouts.
Fill Ink:
Select this feature to reset the ink level to 100% when lling the ink tank.
Ink Level Setting:
Select this feature to set the ink level according to the actual ink remaining.
Remaining capacity of Maintenance box:
Displays the approximate service life of the maintenance box. When is displayed, the
maintenance box is nearly full. When
is displayed, the maintenance box is full.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers.
e
printer feeds paper to clean the
internal rollers.
Related Information
& “Checking and Cleaning the Print Head” on page 133
& “Running Power Cleaning” on page 134
& “Relling the Ink Tanks” on page 203
& “Cleaning the Paper Path for Ink Smears (when the Surface of the Print Result is Smeared Vertically)” on
page 136
Maintaining the Printer
>
Improving Print, Copy, and Scan Quality
>
Menu Options for Maintaining the Printer
143
To Next Page
Loading...
