Epson EcoTank ET-8500 Series - Paper Does Not Feed Properly

Paper Does Not Feed Properly
No Paper Feeds
e following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
& “Environmental
Specications
” on page 279
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 251
& “Unavailable Paper Types” on page 255
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 31
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets
specied
for the paper.
& “Available Paper and Capacities” on page 251
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
& “Paper Size and Type Settings” on page 32
Paper slips when paper dust adheres to the roller.
Solutions
Clean the roller.
& “Improving Paper Feeding Problems” on page 130
Paper Feeds at a Slant
e following causes can be considered.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly
159