EasyManua.ls Logo

Epson EcoTank ET-M1170 - Interface Specifications; Network Interface Specifications

Epson EcoTank ET-M1170
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
168
Interface Specifications
Interface type Hi-Speed USB
Parent topic: Technical Specifications
Network Interface Specifications
Wi-Fi
Standard IEEE 802.11 b/g/n; IEEE 802.11n is available only for the HT20
Security WPA2-PSK (AES); WPA2 compliant with support for WPA/WPA2
Personal
WEP (64/128 bit)
Frequency range 2.4 GHz
Maximum radio frequency
power transmitted
20 dBm (EIRP)
Coordination modes Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Ethernet
Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
Twisted Pair) cable
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45

Table of Contents

Related product manuals