79
• Mac: Drag the removable disk icon for your projector from the desktop into the trash.
Disconnect the USB cable. When the status indicator stops flashing, the projector turns off.
Caution: Do not unplug the power cord while the lights are flashing. This could damage the
projector.
Note: If the status indicator flashes orange, the batch setup file may be corrupt or the cable is not
connected correctly. Disconnect the USB cable, then unplug the projector and try the procedure
again. If the problem continues, unplug the projector and contact Epson for help.
Parent topic: Copying Menu Settings Between Projectors
To Next Page
Loading...
