EasyManuals Logo

Epson EH-TW7300 User Manual

Epson EH-TW7300
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
Using the Projector on a Network
67
Projecting Using Wired LAN
You can send images to your projector through a wired network.
To do this, connect the projector to your network, and then set up your projector and computer for network
projection.
When using EasyMP Multi PC Projection, you can display up to four separate screens from the projector from
up to 50 computers connected to the network.
Download EasyMP Multi PC Projection from the following Web site.
http://www.epson.com
Selecting Wired Network Settings
Before you can project from computers on your network, you need to select network settings on the projector.
c
Before making settings, connect a LAN cable to the LAN port, and connect the projector to the wired
LAN.
a
Press the button to display menus in the order Network - Network Configuration.
b
Select Basic, and then set the following as necessary.
Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
PJLink Password: Set a password to use when you control the projector using compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Remote Password: Set a password to use when you operate the projector from a smartphone or a tablet. You
can enter up to 8 single-byte alphanumeric characters.
Display LAN Info.: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Press the
buttons on the remote control to highlight characters, and then press the
button to enter them.
c
Select Wired LAN, and then press the button.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW7300 and is the answer not in the manual?

Epson EH-TW7300 Specifications

General IconGeneral
Matrix size0.74 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance3 - 6.3 m
Projection technology3LCD
Supported aspect ratios4:3, 16:10
Contrast ratio (typical)160000:1
Screen size compatibility50 - 300 \
Projection distance (wide)3 - 6 m
Projector native resolution1080p (1920x1080)
Keystone correction, vertical± 30 °
Full HDYes
Color modes (2D)Bright cinema, Cinema, Dynamic, Natural
Color modes (3D)Cinema, Dynamic
Video processing10 bit
Supported 3D formatsSide by side, Top and bottom
Analog signal format system-
Supported graphics resolutions640 x 480 (VGA), 720 x 480, 720 x 576, 800 x 600 (SVGA), 1152 x 864 (XGA+), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1280 x 960, 1920 x 1080 (HD 1080), 3840 x 2160, 4096 x 2160
FocusAuto
Focal length range22.5 - 46.7 mm
Lamp power250 W
Light source typeLamp
Service life of light source3500 h
Service life of light source (economic mode)5000 h
Noise level20 dB
Country of originChina
2D/3D frequency image240/480 Hz
Serial interface typeRS-232
USB 2.0 ports quantity2
S-Video inputs quantity0
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.35 W
Power consumption (typical)355 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Ethernet LAN data rates10, 100 Mbit/s
Pallet width800 mm
Pallet height4630 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet16 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width520 mm
Height170 mm
Weight11000 g
Package depth660 mm
Package width515 mm
Package height260 mm
Package weight14384 g

Related product manuals