13
EN
*2 When SSID Auto Setting is set to On, the Passphrase is set automatically to the
projector that is functioning as a simple access point (for supported models only).
Change the Passphrase to use Epson iProjection or to enhance the connection
security.
3. Project using software or applications
Preparing to connect
• Press the
[
LAN
]
button on the remote control to display Network
information (the LAN standby screen).
• Connect the device to the same network as the projector.
(You do not need to do this when connecting a computer using Quick connection
mode.)
Operating the software
A Search for the projector using software or applications.
B Select the projector you want to connect to.
C Select Connect or Join.
D When prompted, enter the keyword currently displayed on the LAN
standby screen.
The operations differ depending on the software or application. See the
operation guide for each software, or the explanation on the App Store, or
Google Play for more details.
Reading the Wireless LAN Indicator
For the specification of this unit, see "Specifications" at the end of this guide.
Indicator Status
Off
This unit is not installed in the projector. Or wireless
LAN is disabled in the projector's Network menu.
Blue
This unit is installed in the projector and connections
are available.
Blue (Flashing quickly)
This unit is installed in the projector and is connecting
to a device.
Blue (Flashing slowly)
An error has occurred. Turn off the projector, reinstall
this unit, and then turn on the projector.
To Next Page
Loading...
Need help?
General
