9
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Removing
Caution
•
If lens shift has been performed, move the lens position to the home position be-
fore replacing the lens unit.
•
Turn off the projector and then wait for a while (approximately 30 minutes) before
removing the lens unit. If you touch the lens unit during projection or immediately
after turning off the projector, it could cause a burn.
A
Attach the lens cover (large).
B
Remove the decorative cover and the
shock absorber unit (depending on the
model you are using).
See the "Attaching the Cover/Projection Distance
Table" supplied.
To Next Page
Loading...
