8
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
G
Attach the shock absorber unit (depending
on the model you are using) and the
decorative cover.
See the "Attaching the Cover/Projection Distance
Table" supplied.
H
Remove the lens cover (large).
Keep the lens cover in a safe place.
After Replacing the Lens Unit
After replacing the lens unit, calibrate the lens so that the projector can correctly
acquire the lens position and adjustment range. After attaching a lens unit, a message is
displayed when the projector is turned on. Select [Yes] to calibrate the lens.
Adjusting the Image
For more information on the following, see the User's Guide supplied with the projector.
•
Focus adjustment
•
Distortion adjustment
When you perform distortion adjustment, the size of the screen changes.
•
Lens shift
•
Keystone correction
*This product is a fixed focus lens. The zoom function is not supported.
To Next Page
Loading...
