Problems with the Projector
■ ■ ■ ■ ■
65
❑ The temperature indicator is red.
The projector is overheating, which turns the lamp off
automatically. Let the projector cool for a few minutes,
then turn it back on. Make sure nothing is blocking the
ventilation vents.
The air filter may be clogged. Clean it as described on
page 59 in Chapter 4 and then let the projector cool for a
while.
If the projector continues to overheat after you clean the air
filter, the problem may be caused by damage to the cooling
fan or internal circuits. Contact a qualified service person.
♦ Warning: Do not attempt to service this product yourself except
as specifically explained in this User’s Guide.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
