What to do if an image does not appear on the Epson Projector screen?
First, ensure the power light is on and the lens cover is off. Then, verify that the cables are correctly installed. If that doesn't work, the correct image source may not be selected. Try pressing the Source button on the remote control or the Source button on the input operation panel to choose another image source.
How to fix 'No Signal' message on Epson EMP-710 Projector?
The message 'No Signal' appears because an image source not connected to the projector is selected, the signal is not being output from the computer, or the signal is not reaching the projector. Make sure the connectors are securely attached to both the projector and the image source. Then check that the image source is selected correctly.
Why is there no sound coming from my Epson EMP-710 Projector?
First, check that the volume setting is not turned all the way down and that the RCA audio cable is securely attached to both the projector and the audio source. Also, make sure that the Mute button is off. The wrong source may be selected. Press either the Computer or Video button on the remote control or Source button on the operation panel to select the proper source.
How to fix a blurred image on my Epson EMP-710?
Adjust the Brightness and Contrast settings on the Video menu. If you’re viewing a computer image, also try adjusting the Tracking and Sync buttons on the projector’s operation panel. There may be dirt or smears on the lens. Clean the lens.
What to do if the operation indicator does not come on on Epson EMP-710 Projector?
Turn off the projector, check that the power cable is connected securely both at the power outlet and the projector, and press the Power button again.
Why is the temperature indicator red on my Epson EMP-710?
The projector is overheating, which turns the lamp off automatically. Allow the projector to cool for a few minutes before turning it back on. Also, ensure that nothing is blocking the ventilation vents. The air filter may also be clogged. Clean the air filter and then let the projector cool for a while. If the projector continues to overheat after cleaning the air filter, the problem may be caused by damage to the cooling fan or internal circuits. Contact a qualified service person.
How to fix Epson Projector when the operation indicator is flashing orange?
The lamp is cooling down. Wait until the light turns off and then turn on the projector.
What to do if the colors of the image are not right on Epson EMP-710?
If you’re displaying a computer image, adjust the red, green, and blue settings in the Video menu. If you’re displaying video, adjust the Color and Tint (NTSC only) settings on the Video menu.
Why is only part of the computer image displayed on my Epson EMP-710?
If the computer’s output resolution setting is higher than 1024 × 768 (EMP-710/700) or 800 x 600 (EMP-500), the projector resizes the image. Choose a different display setting on the computer. You also may need to modify existing presentation files if you created them for a different resolution.
To Next Page
General
