Connecting to a Computer
■ ■ ■ ■ ■ ■
7
Connecting to a PC Desktop Computer
To connect the projector to your PC desktop computer, you
need to:
• Connect the computer cable
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦
Note:
Computer configurations vary. See your computer
manual for the location of the ports needed to connect your
projector.
Connecting the Computer and Monitor Cables
Refer to this illustration while following the steps below.
Computer port
computer cable
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
