Turning On the Computer
After you set up your system, you’re ready to turn on the
power. Follow these steps:
1.
Turn your computer around so the front panel faces you and
place your other system devices (monitor, printer, etc.) in a
convenient arrangement.
2.
Turn on the monitor, printer, and any other devices connected
to the computer.
3.
To turn on the computer, press the power button located on
the right side of the front panel.
power (SPEED) indicator
power
button
The power indicator on the left side of the front panel lights
up. After a few seconds, the screen displays a count of the
system memory, and then the computer performs its
power-on diagnostics. This is a series of checks the
computer runs each time you turn it on to make sure
everything is working correctly.
1-14
Setting Up Your System
To Next Page
Loading...
