Need help?Do you have a question about the Epson Endeavor and is the answer not in the manual?
General| Operating System | Windows 10 |
|---|---|
| Graphics | Integrated Intel HD Graphics or dedicated NVIDIA/AMD |
| USB Ports | USB 3.0 and USB 2.0 |
| Network | Gigabit Ethernet |
| Processor | Intel Core i5 or i7 |
| Optical Drive | DVD-RW |
Step-by-step instructions for powering up the computer system safely and correctly.
Procedures for safely shutting down the computer and connected peripherals.
Explains disk operation, types, and basic interactions with diskette and hard drives.
Advantages and usage of the computer's hard disk drive for efficient data storage.
How to alter jumper settings to control system functions and configurations.
Detailed steps for moving jumpers to change hardware configurations.
Information on SIMM configurations and compatibility for memory expansion.
Procedure for correctly installing SIMM memory modules into sockets.
Steps for safely removing SIMM memory modules from the computer.
Instructions for installing expansion cards into the computer's option slots.
Procedure for safely removing an installed option card from its slot.
Guide to installing an OverDrive or math coprocessor chip.
Detailed procedure for installing video memory chips.
How to configure hard disk drive jumpers for master/slave operation.
Step-by-step guide for installing a hard disk drive in the vertical bay.
Steps to attach the hard disk drive to its mounting plate and install it.
Procedure for disconnecting and removing a hard disk drive from the vertical bay.
Guide for installing drives into the computer's horizontal drive bays.
Steps to attach mounting frames to a hard disk for horizontal bay installation.
Procedure for installing a drive into a horizontal bay using guiderails.
Instructions for connecting cables to drives installed in horizontal bays.
Procedure for disconnecting and removing drives from horizontal bays.
Detailed steps for connecting the hard disk drive ribbon cable to the motherboard.
Steps for executing diagnostic tests on selected system components.
Guidance on handling runtime errors encountered during diagnostic tests.
List of error codes and their corresponding messages during diagnostics.
How to launch the hard disk formatting utility from the Reference diskette.
Procedure for physically formatting a new hard disk for system use.
Steps for reformatting an existing hard disk, including surface analysis.
Detailed steps for the primary 'Format' option, including scanning for bad tracks.
The final steps and warnings for executing the disk formatting process.
Explains how system errors are displayed and handled during operation.
Troubleshooting steps for power-on issues and system startup failures.
Solutions for when the computer locks up or becomes unresponsive.
Procedure to reset the power supply after it shuts down due to overheating.
Diagnosing and resolving issues with the hard disk drive installation and operation.
To Next Page