Special key functions (continued)
1
Key
Purpose
[-)-IF12
Perform
special
functions
within
application
programs.
I-
(PrtSc) Prints
the
screen
display
on
a
printer.
@bid
(Req)
Generates
the
System
Request
function
in
some
application
programs
(used
with
[).
[scmw
Controls
scrolling
in
some
applications.
Ipause)
Suspends
the
current
operation.
m
Stops
the
current
operation
(used
with
[Cm]>.
The
[G),
and
[krdl]
keys work as toggles; press
the key once to turn on a function and again to turn it off. When
the function is enabled, the corresponding light in the upper
right corner of the keyboard is on.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you have entered an MS-DOS or application
program command that you want to stop, try one of the
following:
Cl
Press
[Pause]
Q
Hold down the
[T]
key and press
[c1
0
Hold down the
[w]
key and press
[WI.
If these methods do not work, you may need to reset the
computer as described below. Do not turn off the computer to
exit a program or stop a command unless you have to, because
the computer erases any data you did not save.
Using Your Computer
1-21
To Next Page
Loading...
