Adding Tests
If you want to add devices to the Items Detected list, follow
these steps:
1. Press
[c]
or
[T)t
to select Add Tests. You see the Add
menu, such as the following:
Numeric Coprocessor
Diskette Drive B
Hard Disk Drive #2
Serial Port COM3
Serial Port COM4
Printer Port LPT2
Printer Port LPT3
LPTl Printer Test
LPT2 Printer Test
The Add menu lists the testable devices that the computer has
not detected as Enabled in your system. You also see any
devices that you deleted from the Delete menu in case you
want to be able to test them.
2.
Press
[T]
or
(7)
to highlight the device you want to add
and press [Enter). The device is removed from the Add
menu and added to the Execute list. You can add as many
devices as you want.
3.
When you are finished adding devices, press
(t]
to select
Execute
and see the next section.
4-4
Running System Diagnostics
To Next Page
Loading...
