Epson Endeavor - Mouse Problems

4.
5.
6.
Did you run the SETUP program to update your computer’s
configuration after installing the card? See Chapter 2 of the
Setup Guide.
If you used the option card to add an external device to
your computer, did you use the proper cable to connect the
device to the card?
Did you perform the correct setup procedures for the
software you are using with the option card? See your
option card or software manual for instructions.
Mouse Problems
If you have trouble with your mouse or you see an auxiliary
device error message, check the following:
1.
Make sure the mouse cable is securely connected to the
mouse port and not the keyboard port. See Chapter 1 of the
Setup Guide for instructions.
2.
Did you install the mouse driver correctly? See your software
manual and the documentation that came with your mouse
for instructions. (If you are using Windows, it has already
installed a mouse driver automatically.)
6-24 Troubleshooting