69
Scanning
You can scan your originals and save them as digital files.
Starting a Scan
Scanning in Epson Scan 2
Starting a Scan
After placing your originals on your product for scanning, start scanning using one of these methods.
Starting a Scan Using the Product Buttons
Starting a Scan Using the Epson Scan 2 Icon
Starting a Scan from a Scanning Program
Parent topic: Scanning
Related tasks
Placing Originals on the Scanner Glass
Starting a Scan Using the Product Buttons
You can scan an image and save it as a PDF using your product's control panel buttons.
Note: You must connect your product with a USB cable to scan using the buttons.
1. Make sure you installed the product software and connected the product to your computer.
2. Press the B&W copy button and the color copy button at the same time.
Your original is scanned and saved as a PDF on your computer.
Changing Default Scan Job Settings
Parent topic: Starting a Scan
Changing Default Scan Job Settings
You can view or change the default scan job settings your product uses when you scan to your
computer. You do this using the Event Manager program.
1. Do one of the following to open Event Manager:
• Windows 10: Click and select EPSON Software > Event Manager.
• Windows 8.x: Navigate to the Apps screen and select Event Manager.
To Next Page
Loading...
