89
2. Load a few sheets of plain paper in the product.
3. Hold down the stop button and press the power button to turn the product on.
4. When the product turns on, release both buttons.
The product begins printing a nozzle check pattern.
5. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
6. If there are no gaps, the print head is clean and you can continue printing.
If there are gaps or the pattern is faint, clean the print head.
Parent topic: Print Head Nozzle Check
Related tasks
Loading Paper in the Sheet Feeder
Cleaning the Print Head Using the Product Buttons
Refilling the Ink Tanks
Checking the Nozzles Using a Computer Utility
To Next Page
Loading...
