Epson ET-3843 - Enabling Wi-Fi Direct (Simple AP) Mode

40
Enabling Wi-Fi Direct (Simple AP) Mode
Parent topic: Wi-Fi or Wired Networking
Enabling Wi-Fi Direct (Simple AP) Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer,
mobile devices, or other devices (up to 8) without a wireless router or access point.
Note: Make sure the Epson Smart Panel app or another compatible Epson printing app is installed on
your mobile device before connecting to the product.
1. Press the home button, if necessary.
2. Select the icon and press the OK button.
You see a screen like this:
3. Select Wi-Fi Direct.
4. Scroll down and select Start Setup.